CROWN LEISURE SPA COVERS

Five Year Limited Spa Cover Warranty Free Spa Cover Shipping in Continental US SPACOVERZ has replacement spa covers available for all CROWN LEISURE Spa Models including the Bradford, Hampton, Lexar, Marquis, Omni and Westin. If you do not see your model listed, no problem, we can still make a great cover for your spa. FREE SHIPPING and FIVE YEAR LIMITED WARRANTY on all Spa Covers.

SPACOVERZ.COM has an Encyclopedia of different spa manufacturers and their spas. We utilize this resource to match up the correct spa cover dimensions to your spa. So the more information you know about your spa (manufacturer, model and model year), the easier it is to get you the correct spa cover.

To learn more about the features of our replacement spa covers Click Here.


Please complete each question below and then hit the "Add to My Cart" button to proceed with your order.

CROWN LEISURE SPA COVERS
crownleisurespacovers$289.95

Select your Existing CROWN LEISURE Spa Model (Click Here if Model Not Known)

Model Not Listed? Enter Model Here
:

Select Existing CROWN LEISURE Spa Model Year (If Known)


Select Desired Cover Color (See Colors Below)


Select Desired Cover Model (See Models Below)


Select Desired Skirt Length (See Tips Below)


Select Fold (See Instructions/Diagram Below)

FREE SHIPPING to Lower 48 States.

Return to Top of Page

SPA COVER MODELS

CLASSIC SPA COVER
High quality spa cover with 4" - 2" tapered foam inserts (foam density 1 lb) and reinforced galvanized channeling for support. Top Stitched for added strength and quality.

4" - 2" Tapered Foam (5" - 3" Taper Available)
Reinforced Galvanized Channeling for Support
Foam Insulation R-value 15 (Foam density 1 lb)
Four Tie Downs with Keyed Lock Fasteners (Child Proof Locks)
Two Steam Stoppers
Top Stiched for added strength and quality
Double Welt cording
Two Handles
Available in 14 Colors
5 Year Manufacturer's Warranty
Up to 8 Feet in Length


PRESTIGE SPA COVER
High quality spa cover with 4" - 2" tapered foam inserts (foam density 1 lb) and reinforced aluminum channeling for support. Double Top Stitched for added strength and quality.

SPECIAL-For A Limited Time- The Prestige Model is being upgraded to include a 4 mil Chemical Resistant Vapor Barrier ($30 Value). This doubles your protection against water absorption and can extend the usable life of your cover an additional 12 -18 months.
4" - 2" Tapered Foam (5" - 3" Taper Available)
Reinforced Aluminum Channeling For Support
Four Tie Downs with Keyed Lock Fasteners (Child Proof Locks)
Two Steam Stoppers
Double-Top Stitched for Added Strength & Quality
Foam Insulation R-value 15 (Foam density 1 lb)
Double Welt cording
Two Handles
Available in 14 Colors
5 Year Manufacturer's Warranty
Up to 8 Feet in Length"


WALK-ON SPA COVER
High quality spa cover with 4" - 2" tapered foam inserts with Fiberglass Sheets Laminated on Top and Underside.

4" - 2" Tapered Foam Inserts with Fiberglass Sheets Laminated on both the Top and Underside for Superior Strength
Four Tie Downs with Keyed Lock Fasteners (Child Proof Locks)
Two Steam Stoppers
Double Welt cording
Two Handles
Available in 14 Colors
Can Hold the Average Weight of Two Adults
Foam Insulation R-value 19 (Foam density 2 lb)
5 Year Manufacturer's Warranty
Up to 8 Feet in Length


Return to Top of Page

The colors shown here are intended as approximates and can vary depending on your display monitor. The actual colors will also vary slightly by dye lot, run or manufacture of material.

Return to Top of Page

SPA COVER SHAPE DIAGRAMS


Rectangle Rectangle with Radius Corners Square Square Square with Two Cut Corners Square with Three Cut Corners Square with Four Cut Corners Square with Radius Corners Round Octagon-Symmetrical (Equal Sides) Octagon Asymmetrical (Uneven Sides) Ellipse or Taper

Return to Top of Page


How to Measure a RADUIS
How to measure a radius spa corner
Measure the radius by placing a carpenter's square on the outside of your spa or existing cover. The distance between the corner of the carpenter's square and the place where it TOUCHES the spa (A) equals the radius of the curve (see diagram). The measurement for (B) should be exactly the same. The standard radius is between 5 to 9 inches.

Another method to determine the radius of your spa's corners is to take a sheet of paper and trace around one of the curved corners of your spa or existing cover. Remove the paper and by freehand (or with a divider/measuring compass) complete drawing the full circle. Then measure across the middle of the circle you drew, and divide by 2. This number is the radius. The standard radius is between 5 - 9 inches.

The key is to NOT make the radius too big. If you measure the radius too large, it WILL NOT cover the radius corner. However, if you measure it too small, it will be just fine. It may hang over slightly but there will not be a noticeable difference. When in doubt, use the smaller measurement. The smaller the radius measurement, the larger the cover will be. The larger the radius, the more the cover will be "cut off".

You can also utilize this Radius Template to help determine the correct radius measurement. Radius Template.

If you are still unsure or not confident, you can always trace the existing corner of your existing spa cover and fax a copy to us. You can fax it to 856-804-1704. Please write your name and order number on the fax.

Radius calculator


Return to Top of Page




Tips on Skirt Size
The cover has a flap (typically 2-4 inches) around the edges of the spa called a skirt. The skirt must easily sit over the edges of the spa, with a little room to spare. You can either measure your existing skirt length or use the default measurment for your particular spa. The standard most often seen is 2 1/2 inches. The longest the skirt can be is 6 inches. You will want this to hang straight down. So, if the lip of the spa is at an angle, make sure you measure the cover long enough to achieve this. Also, measure the skirt (2 1/2" is standard) long enough to cover the spa lip, or the spa cabinet rim. If you have any questions about this, please contact us at 1-888-338-0601.

Return to Top of Page




Tips on Fold Selection
Please look at the Cover Shapes Spa Cover Shape Diagrams to determine the Fold of your cover. Select either Fold ONE or Fold TWO. The industry standard is to cut the bigger size in half. If you have any questions about this, please contact us at 1-888-338-0601.

Return to Top of Page




Email us at:


Five Year Limited Spa Cover Warranty Free Spa Cover Shipping in Continental US

Your on-line store that allows you to order replacement spa covers. Our customer representatives are also available to take your order and answer any questions you may have. You can contact us by phone at 1-888-338-0601. You can also email us at

SpaCoverZ Home - SpaCoverZ Index - Spa Covers - Spa Cover Models - How to Measure a Spa Cover - Spa Cover Colors - Spa Cover Shapes - Shipping/Delivery Info - Customer Service/Policies/Info -





Bass Fishing Boats - Canopies - Outdoor Shelters - Portable Spas - Flowers - Aah! Marketing! Home